Many times, individuals don’t understand what to do to fix a water-damaged phone. When their phone gets dropped into water accidentally or in heavy rainfall. So, if you get yourself in such a condition like your phone dropped into water! Then you don’t need to panic. You can take several steps to help save your phone from more damage.
This guide shares simple steps to safely protect your phone from water damage at home.
After performing steps or tricks, your phone will start again and function normally.
Effective Steps to Fix Water-Damaged Phones Safely at Home
Here are the helpful steps to fix the water-damaged phone issue.
Step 1: Turn Off the Phone Instantly
The primary thing you will need to do is get your phone out of the water and turn it off immediately.
It’s important for the reason that it prevents short circuits. Turning off your phone gives it the best chance for a successful recovery.
Press & hold the power button to turn off the phone. This step would be helpful in protecting your phone from further harm.
Step 2: Get rid of External Components
You can troubleshoot more by removing the external parts of your phone. These include:
- Phone casing
- SIM card
- Memory card
- Screen protector
- Eliminate phone battery as well (If probable, like older models)
Step 3: Dry Your Phone to Stain Excess Water
After turning on your phone and disassembling the components, you must take a step to dry your phone.
- Make sure to always use a dry cloth or paper towel to dry your phone.
- Lightly dry your phone outside by dabbing take out excess water from the phone.
- Stay away from shaking the phone, as it can drive water deeper.
Step 4: Don’t Use Dryers
Avoid using heat or a hair dryer. Hot air can harm your phone’s internal parts.
If you have a wet or dry vacuum, then you can use it to get rid of any excess water from your mobile phone. However, beware not to get too close to the phone or use too much dryer suction, which can damage the phone.
Also, using the dryer too much can harm the phone, as well as weaken or melt adhesives.
Further, ensure you don’t keep your phone in the microwave, ovens, or directly under sunlight.
Step 5: Use a Desiccant to Soak up Moisture
Next, deposit your phone in a sealed container with desiccants, such as silica gel and dry rice. Desiccants help soak up moisture from your water-damaged phone. You have two options:
With Silica Gel Packets:
- Put your device in an airtight box with silica gel packets and put it down for 24 to 48 hours.
- This desiccant is also recommended as the best option by professional expert.
- As the method will help absorb any remaining moisture from your phone.
With Uncooked Rice:
- Put your phone in an airtight bag or jug. Add desiccants like uncooked rice or dry rice. Leave it there for 48 to 72 hours.
- The Rice method is a popular DIY hack. However, it’s less effective and doesn’t guarantee success.
- Even sometimes, the consequence will not appear perfect. Because rice may contain dust or starch residues; it’s not great.
Step 6: Wait it Out and Reassemble
Later than 24 to 48 hours, pull out your phone from the airtight container. Then reassemble your phone carefully. Again, insert your phone components, such as the battery, SD card, SIM card, and others.
Step 7: Check Functionality and Power On to Test
After putting the phone back together, check if it works properly.
- Check all features:
- Access the camera
- Test the touchscreen
- Make phone calls
- Test the speaker and microphone
- Inspect the charging port
- Verify Wi-Fi and Bluetooth
- And more
- Ensure all phone parts function well. Check that the buttons, like volume up and down, work properly.
- Check the touchscreen by booting up your phone normally. Also, listen for clear audio.
However, in case any components don’t work or even the phone device doesn’t respond correctly!
Or if you come across any issues, such as an unusual noises, a distorted screen, crash to turn on and others! Then you must seek for professional expert to get phone repair service in Dubai.
What Things don’t you need To Perform?
- You don’t perform charging activity while it’s still wet, as it can cause electrical damage.
- You don’t press buttons like power or volume that can push water deeper into the phone.
- Make sure you do not try to unlock or use the phone if you are not skilled.
- You don’t need to shake the spray water inside it as it can damage sensitive circuits or camera lens.
- You don’t try other DIY hacks unless recommended by phone repair experts.
- Make sure not to try to blow because, due to direct air forces, moisture can be damaged.
- Ensure that you do not use the microwave or oven for drying the phone and wrapping components.
- Don’t try to open your phone with no suitable tools, as doing so can invalidate the warranty and cause further harm.
Wrapping Out:
A water-damaged phone is a serious problem. It’s important to act quickly to reduce the damage to the device. By following the above steps, there is a great chance to recovery successfully. But remember Phone recovery and protect the personal data is also crucial.
Contact a mobile repair expert for fast help with your water-damaged phone. An experienced and reliable technician can fix water damage properly. If needed, they can also use genuine spare parts.
With a skilled technician’s help, your phone can work smoothly again.
